Unitate Translator Sennheiser SL Interpreter

 

SL Interpreter este un centru de control compact si de sine statator pentru traducere simultana dintr-una sau mai multe limbi. Acesta permite ca unul sau doi translatori sa monitorizeze limba de baza sau traducerea altui coleg, sa selecteze intrarile de microfon si sa trimita semnalul cu interpretarea la iesiri diferite.
SL Interpreter este un echipament ideal pentru conferinte sau prezentari unde este utilizata doar limba de baza si o traducere din limba de baza. Se recomanda utilizarea sa impreuna cu TourGuide 2020 sau TourGuide 1039.

- control individual de volum si ton pentru 2 traducatori
- se pot monta in cascada pana la 4 console, avand amplificatoare de distributie integrate
- limba de baza tranziteaza consola
- multe optiuni pentru microfoane si casti

 

Caracteristici tehnice:

Dimensiuni : 25.4 cm x 16.1 cm x 6.2 cm
Greutate : 1.5 Kg.

INPUTS & OUTPUTS

Floor In : 3-pin XLR female jack, balanced (or unbalanced) input with 24 kOhm differential input impedance, max balanced input is +19dBu

Link In / Out : CAT 5 8p8c RJ45 female receptacle, distributes balanced line level Floor and Relay audio to another SL Interpreter

XLR Microphone Inputs : 3-pin XLR female jack, balanced (or unbalanced) input. Switchable 12VDC simplex power. Variable gain of 58 dB, 2.4 kOhm balanced input impedance, maximum balanced input is +19 dBu

3.5mm Microphone Inputs : Stereo 3.5 mm TRS phone jack, pink, and stereo 3.5mm TRRS phone jack, black, unbalanced (r,s) for electret condenser mics, variable gain of 40dB. Bias is 3.7VDC through 2.7 kOhm

3.5mm TRRS Headphone Output : 3.5mm TRRS phone jack, Tip = Left, Ring 1 = Right, Ring 2 = GND, Sleeve = Mic. 40mW max power into 32 Ohm stereo headset.

3.5mm Headphone Output : 3.5mm TRS phone jack, mono or stereo headphone, 8 Ohm minimum. 190mW max power into 32 Ohm stereo headset.

CH1 Out, CH2 Out : 3-pin XLR male jack, balanced output. Max output is +19dBu into 600 Ohm balanced load impedance.

RCA Jacks : Red: RCA jack for recording and CH1 audio (Interpreter audio only, no feedthrough). White: RCA jack for recording CH2 audio.

CONTROLS

Volume : Left and Right rotary, controls headphone volume

Bass and Treble Tone : Left and right rotary with center detent, controls headphone bass and treble tone levels.

Mute : Push button, backlit red, mutes left and right mics while pressed.

Mic on : Push button, backlit bright red, activates microphone. Right and left Mic On buttons are inter-locked; mic can only be turned on if the other is off.

Floor Input, Relay Input : Push buttons, backlit blue, select listening language group. Listening modes are either/ or: turning one on disables the other

CH2 Output : Push button, backlit yellow, selects microphone output language group: light on = CH2 Out, light off = CH1 Out.

Gain Adjust : Rotary gain pots control level of microphone and Floor audio.

Phantom Power : Slide switch enables 12VDC Simplex power to XLR microphone.

CH1 Feedthrough : Slide switch enables Floor feedthrough to CH1 Out XLR jack.

CH2 Feedthrough : Slide switch enables Floor feedthrough to CH2 Out XLR jack.

Ground Lift : Slide switch disconnects Chassis and Audio Grounds internal to the console.

INDICATOR

Peak Level Indicator : Green LED on back panel indicates optimal audio output level on Norm Out XLR when blinking.

CH2 Output in Use Indicator : Yellow LED on front panel indicates when CH2 is in use.

 

Livrarea include:

SL Interpreter
Power Supply
Cat5 Link Cable
Manual
Safety Guide


Garantie: 24 luni.

 

(Pagina anterioara)

Unitate Translator Sennheiser SL Interpreter
clic pe poza pt. marire
Pret: 8046 Lei

(TVA inclus)
Cumpara
 
Disponibilitate:
la comanda
 
Quick Guide
(Eng. PDF-4.47 MB)
Sennheiser SL Interpreter
Sennheiser SL Interpreter
Sennheiser SL Interpreter
Sennheiser SL Interpreter
Sennheiser SL Interpreter
clic pe poza pt. marire
 
 
Copyright 2005-2016© Video’S srl
Toate drepturile rezervate